Battery replacement
The most common fix for a unit that fails the test.
HandyMangum Facility Solutions
Exit sign and emergency light repair and replacement
Quick answer
Exit signs and emergency lights run on backup batteries that wear out, and failed units are a common fire-inspection finding. HandyMangum Facility Solutions can test units, replace batteries and lamps, and swap failed exit signs and emergency lights for new LED units, then retest them, for offices, stores, clinics and community buildings across Central Florida. New circuits and wiring changes are done by licensed electricians.
What this work involves
Most exit signs and emergency light units have a test button and a battery that typically lasts a few years. When the battery fails, the unit may still light on normal power but will not stay on in an outage, which is what an inspector checks.
The usual fix is a new battery or lamp, or a like-for-like replacement unit on the existing circuit. We test every unit we touch and list what we did, so you have a record for your next inspection.
Who it is for
- Offices and medical practices
- Retail stores and restaurants
- Churches, schools and community buildings
- HOA clubhouses
- Property managers with a fire-inspection report
- Facility managers doing routine testing
What the job involves
Test
Push-to-test each unit and note failed batteries, lamps or units.
Replace
Batteries and lamps, or the full unit, like-for-like on the existing circuit.
Retest and document
Each unit tested again and listed for your records.
Options
LED exit sign replacement
New LED signs use less power and last longer.
Combo exit and emergency light units
One unit with the exit sign and two emergency heads.
Remote heads
Extra emergency light heads in halls or restrooms, on existing units.
Fire-inspection corrections
Working through the exit sign, light and egress items on an inspection report.
Punch listsRoutine testing
Add testing to a preventive maintenance schedule.
Preventive maintenanceGood to know
- Fire codes commonly call for a monthly 30-second test and an annual 90-minute test of emergency lighting; your fire marshal or inspector sets what applies.
- Fire alarm and sprinkler systems are serviced by licensed fire protection contractors, not by us.
- New circuits, relocations or anything beyond like-for-like replacement: If any part of the job needs a permit or a state-licensed trade, such as new plumbing lines or new wiring, we tell you during the quote and that part is handled by properly licensed professionals.
Exit Signs & Emergency Lights FAQs
How often should exit sign batteries be replaced?
When they fail the test. Many batteries last a few years; testing monthly and annually tells you when.
How do I test an exit sign?
Press and hold the test button: the sign should stay lit on battery. The annual test runs it on battery for 90 minutes.
Can you fix items from our fire inspection report?
Yes, for exit signs, emergency lights, door hardware and other non-system items. Fire alarm and sprinkler items go to fire protection contractors.
Do you replace whole exit sign units?
Yes, like-for-like on existing circuits, usually with LED units.
Do you do electrical work?
Like-for-like replacements on existing circuits. New wiring, circuits or relocations are done by licensed electricians.
How do I request service?
Call or text (407) 699-1123, email services@handymangum.com, or use the online request. Send the address, the issue, photos and any access notes; we confirm the scope and send a written quote or schedule the visit.
Failed an emergency light test?
Call or text (407) 699-1123, email services@handymangum.com, or send the online request. Commercial estimates are free.